Platform specs and compliance6 min read

9:16 safe zone for Reels, TikTok and YouTube: one frame that clears all three, measured from the official templates

The 9:16 safe zone differs by platform. We measured TikTok's and YouTube's official templates in pixels and combined them with Meta's numbers into one frame.

By overads Inc., the team building gloofy

The 9:16 safe zone is the part of a vertical ad that no platform interface covers. It is not the same on every platform. Measured on a 1080 by 1920 frame, Meta asks for about 269 pixels clear at the top and 672 at the bottom. TikTok's template blocks 240 at the top and 660 at the bottom, plus a column on the right. Google's YouTube overlay blocks 288 at the top, 672 at the bottom and 192 on the right. One ad that must run on all three should keep its key elements inside a region of about 660 by 960 pixels.

Why guides disagree on 9:16 safe zones

Only Meta publishes its safe zone as numbers in text. TikTok and Google publish theirs as template images, and most third-party guides measure those images differently, or copy each other. Searching this week, we found TikTok's bottom margin quoted as 483 pixels, 660 pixels and 25% of the frame in different guides.

So we went to the source. We downloaded TikTok's standard in-feed template from its ads help page, last updated in June 2026, and the vertical overlay from Google's video ad specs page. Then we measured the transparent safe areas pixel by pixel. TikTok's template is drawn at 720 by 1280 and labelled in pixels, and we scaled it to 1080 by 1920. Google's overlay is already 1080 by 1920. Meta's figures are its published percentages applied to the same frame.

9:16 safe zone by platform, in pixels

All values are on a 1080 by 1920 frame. "Clear" means keep text, logos, products and calls to action out of that margin.

PlatformTopBottomLeftRightNotes
Meta Reels269 (14%)672 (35%)65 (6%)65 (6%)From Meta's published percentages
TikTok in-feed240 (12.5%)660 (34.4%)120 (11.1%)120 (11.1%)Plus a 180-pixel column on the right, from 840 pixels down
YouTube vertical video ads288 (15%)672 (35%)48 (4.4%)192 (17.8%)Google's overlay is not symmetrical

Three details matter more than the headline margins.

  • TikTok's right-hand column. In TikTok's template, the like, comment and share buttons take a strip 180 pixels wide on the right of the lower half, starting 840 pixels from the top. Anything you place in the lower right of the safe area sits under those buttons.
  • YouTube's right margin. Google's overlay keeps 192 pixels clear on the right and only 48 on the left, so centring a product horizontally on YouTube places it slightly towards the covered side.
  • Bottom margins nearly agree. All three platforms keep roughly the bottom 35% clear, for the caption, account name and call-to-action button. Product shots and captions belong in the middle of the frame, not the lower third.

One 9:16 safe zone that clears all three platforms

If one asset runs on Reels, TikTok and YouTube, take the strictest margin on each side:

  1. Top: 288 pixels (YouTube).
  2. Bottom: 672 pixels (Meta and YouTube).
  3. Left: 120 pixels (TikTok).
  4. Right: 192 pixels (YouTube) above 840 pixels from the top, and 300 pixels (TikTok's margin plus its button column) below that.

That leaves a combined safe area from x 120 to 888 and y 288 to 1248, with the bottom-right corner below y 840 trimmed back to x 780. In practice the simplest rule is a box from x 120 to 780 and y 288 to 1248: 660 by 960 pixels, about 31% of the frame. Every key element fits in under a third of the screen.

That figure is the real cost of producing one asset for three platforms. If your product shot or headline needs more room, make separate cuts per platform rather than shrinking it.

Templates change, so check them

These numbers describe the templates as published today. The TikTok file we downloaded was dated April 2025 inside its archive, though the page linking it was updated in June 2026. Google's page carries no date and calls its overlay a universal safe zone for video ads on YouTube, without naming Shorts. Interfaces change, and a layout redesign can make every number here wrong overnight.

Two habits protect against that. Overlay the current official template on every final export before upload; it takes seconds. And keep the margins in one place, such as a brief template or a prompt, so updating them updates everything downstream. If you add an AI label to an ad, it must also clear these margins, as our guide to AI ad disclosure explains.

Why safe zones belong in the prompt

Safe zones are facts, and we have measured what happens when a model is told a fact rather than trained on it. On writing image direction for 9:16 ads, our untrained base model respected Meta's safe zones in 9 of 10 cases when the margins were stated in its instructions, and our fine-tune managed 5 of 10. That result is in our build log. The single-platform detail for Meta, including the Stories spec, is in our guide to the Instagram Reels safe zone.

So if an assistant writes your briefs or image prompts, paste the table above into its instructions, with the platform each asset is for.

Where gloofy fits, and where it does not

Our image composition work, gloofy-image, was measured only against Meta's 9:16 safe band, not TikTok's or YouTube's, and its weights are not released. The Building now safe-band scoring API that would return that score with each generated image is not live, as the safe-band scoring section states. Nothing we ship today checks a finished video against these templates; the official overlays do that for free.

What we can offer is the measurement above and the rule from our own results: write the margins into the brief. Other platform rules collect in the platform specs and compliance hub.

What to do this week

  • Download the current Meta, TikTok and YouTube templates and keep them in one shared folder with the date you downloaded them.
  • For assets that run everywhere, keep key elements inside x 120 to 780 and y 288 to 1248 on a 1080 by 1920 frame.
  • Check the lower right of every TikTok cut for anything under the button column.
  • Put the margins in your brief and in any AI prompt that writes creative direction.

FAQ

What is the 9:16 safe zone?

It is the area of a vertical 9:16 ad that the platform interface does not cover with captions, buttons or account names. Text, logos, products and calls to action belong inside it. The size differs by platform: on a 1080 by 1920 frame, the bottom 660 to 672 pixels are covered on Meta, TikTok and YouTube.

What is the TikTok safe zone in pixels?

Measured from TikTok's official in-feed template and scaled to 1080 by 1920, keep 240 pixels clear at the top, 660 at the bottom and 120 on each side. Also avoid a 180-pixel column on the right below 840 pixels from the top, where the like, comment and share buttons sit.

What is the YouTube Shorts safe zone?

Google's vertical video ad overlay, measured at 1080 by 1920, keeps 288 pixels clear at the top, 672 at the bottom, 48 on the left and 192 on the right. Google's page calls it a universal safe zone for YouTube video ads and does not mention Shorts, so check the current template before relying on it.

Is there one safe zone for Reels, TikTok and YouTube?

Yes, if you take the strictest margin on each side. On a 1080 by 1920 frame, keep key elements between x 120 and 780 and y 288 and 1248, a box of 660 by 960 pixels. That is about 31% of the frame, so separate cuts per platform often work better.

Sources

  1. Meta, "Awareness Video ad specs on Instagram Reels", Facebook Ads Guide
  2. TikTok Ads Manager Help, "TikTok Auction In-Feed Ads", updated June 2026
  3. Google Ads Help, "About video ad specs"